Pacific Combustion is the largest independent laboratory furnace d....
Industrial Laboratory Ovens - Heating & Drying Oven Distributo....
Pacific Combustion carries laboratory freezers built using state o....
Pacific Combustion offers laboratory refrigerators manufactured by....
Pacific Combustion offers industrial water baths and chillers from....
General Purpose laboratory incubators sold by Pacific Combustion c....
MANUFACTURERS WE CARRY
For 68 years Pacific Combustion's been a....
The Carbolite Gero high temperature tube furnaces HTRH can be used horizontally up to 1800℃.
The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity.The insulation and molybdenum disilicide (MoSi2) heating elements are installed in the rectangular housing.The heating elements are vertically hanging and can be replaced easily.At higher temperatures and in the presence of oxygen,MoSi2 develops an oxide (SiO2) layer,which protects the heating elements against further thermal or chemical corrosion.
Three-zone tube furnaces (HTRH-3) can achieve better temperature uniformity than single-zone versions.In these models each zone is equipped with a dedicated thermocouple and controller,which is especially useful to preheat gases required for reactions inside the system.
The HTRH tube furnaces do not include an integral work tube.The work tube must be selected as an additional item.The work tube length is dependent on the application and will vary if used with or without modified atmosphere or vacuum.
This furnace provides the following advantages: easy loading of samples and uniform heating achieved by locating elements in all six side walls of the chamber.The 1600℃ is ideal for sintering of zirconia dental crowns and frameworks.The silicon carbide heating elements will not cause discolouration of the zirconia.
The HB top hat furnace range has an automatically operated vertically moving hood for heat treatment in air.The moving hood design allows samples to be accessed from three sides.The HB can be equipped with CrFeAl heating wires up 1300℃ or with MoSi2 heating elements for temperatures up to 1800℃.
The HB hood furnaces are available with usable volumes of 80 to 514 litres with the inner space being rectangular in design and the base plate having a convenient height of 750 mm.The hood moves up and down automatically to load and unload the sample.
All debinding applications require the use of an optional afterburner.The afterburner is driven by propane gas and compressed air to burn any evaporating binder.
Carbolite Gero specializes in custom designed furnaces and can also create a customised version of the HB to accommodate specific heat treatment needs.It is possible to equip a gas circulating system to improve temperature uniformity.Several sample thermocouples can be inserted into the furnace chamber to monitor and test the temperature profile.Through the use of a serial interface,the thermocouple data is logged at predefined intervals for evaluation.
The furnace is operated manually with a Eurotherm controller.Other controllers are available upon request.
RHF 16/15 1600°C, 15 liter, Chamber Furnace (220 – 240 V -SR-single phase +N)
The RHF range of silicon carbide heated high temperature chamber furnaces features robust construction and high quality elements that provide rapid heating rates (typically reaching 1600 °C in under 40 minutes) and a long reliable working life.
RHF 16/35 1600°C, 35 liter, Chamber Furnace (220 – 240 V -SR-three phase no N)
Carbolite High-Temperature Chamber Furnace 1600°C 3 Litres. 200-210V Single Phase. 301 PID controller with a single ramp to setpoint & process timer, Soft closing parallel action door, silicon carbide heating elements provide long life and able to withstand the stresses of intermittent operation, Type R Thermocouple. Internal Dimensions 4.72 H 4.72 W 8.07 D.
RHF 16/8 1500°C, 8 liter, Chamber Furnace (220 – 240 V -SR-three phase no N)
The RHF range of silicon carbide heated high temperature chamber furnaces features robust construction and high quality elements that provide rapid heating rates (typically reaching 1500 °C in under 40 minutes) and a long reliable working life.
The HTRV-A split tube furnaces have a maximum operating temperature of 1700℃.
The split heating module allows either easy positioning of the work tube or positioning around reactors which have fixed end flanges.The split design may also allow faster cooling of samples.The control thermocouple is fitted in the centre of the heating zone.Cooling channels are engineered into the housing to aid with convection cooling of the outer case.
The two furnace chamber halves consist of high grade insulation plates with vertically hanging MoSi2 heating elements.A safety switch protects the operator by switching off the heating elements once the furnace is opened.
The tube furnace is supplied without a stand,allowing customers to build them into their own equipment.Optional L stands are available allowing the furnaces to be self supporting.
Get In Touch
Click to Save Contact Info
Are you Human?*