-- Type to Search Products --

Carbolite 3-Zone High Temperature Horizontal Tube Furnaces HTRH HTRH-3-100-600 1600℃,1700℃,1800℃

The Carbolite Gero high temperature tube furnaces HTRH can be used horizontally up to 1800℃.

The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity.The insulation and molybdenum disilicide (MoSi2) heating elements are installed in the rectangular housing.The heating elements are vertically hanging and can be replaced easily.At higher temperatures and in the presence of oxygen,MoSi2 develops an oxide (SiO2) layer,which protects the heating elements against further thermal or chemical corrosion.

Three-zone tube furnaces (HTRH-3) can achieve better temperature uniformity than single-zone versions.In these models each zone is equipped with a dedicated thermocouple and controller,which is especially useful to preheat gases required for reactions inside the system.

The HTRH tube furnaces do not include an integral work tube.The work tube must be selected as an additional item.The work tube length is dependent on the application and will vary if used with or without modified atmosphere or vacuum.

SKU: HTRH-3-100-600 Categories: , Tags: , ,

Carbolite 3-Zone High Temperature Horizontal Tube Furnaces HTRH HTRH-3-100-600 1600℃,1700℃,1800℃

Technical Specification

Max. temp. [℃] 1600, 1700, 1800
Heat-up time [mins]
Max. continuous operating temp. [℃]
Dimensions: Usable chamber H x W x D [mm]
Dimensions: External H x W x D [mm] 620 x 890 x 520
Dimensions: External with door open H x W x D [mm]
Temperature uniformity of ±5℃ within H x W x D [mm]
Volume [litres]
Max. power [W] 10900
Holding power [W]
Thermocouple type
Furnace Weight [kg] 120
Retort Volume [litres]
Max. temp with Retort
Dimensions External Overall Size
Retort Internal Size
Uniform volume ± 5℃
Uniformi
The Carbolite Gero high temperature tube furnaces HTRH can be used horizontally up to 1800℃.

The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity.The insulation and molybdenum disilicide (MoSi2) heating elements are installed in the rectangular housing.The heating elements are vertically hanging and can be replaced easily.At higher temperatures and in the presence of oxygen,MoSi2 develops an oxide (SiO2) layer,which protects the heating elements against further thermal or chemical corrosion.

Three-zone tube furnaces (HTRH-3) can achieve better temperature uniformity than single-zone versions.In these models each zone is equipped with a dedicated thermocouple and controller,which is especially useful to preheat gases required for reactions inside the system.

The HTRH tube furnaces do not include an integral work tube.The work tube must be selected as an additional item.The work tube length is dependent on the application and will vary if used with or without modified atmosphere or vacuum.
Standard features

1800℃ maximum operating temperature
Programmable 3216P1 controller
3-zone models fitted with 1 x programmable 3216P1 and 2 x 3216CC end zone controllers,with retransmission of setpoint
Over-temperature protection
Accepts work tubes with outer diameters up to 100 mm for use with modified atmosphere
Accepts work tubes with outer diameters up to 200 mm for use in air
Heated lengths of 100,250,300 or 600 mm
Low thermal mass ceramic fibre insulation
Vertically hanging,high quality MoSi2 heating elements
Rectangular housing with holes for convection cooling
Available with 1 - 3 heating zones
Furnace comes with separate control box with 3 m cable,plug and socket

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
A range of additional work tubes is available in a variety of materials
Insulation plugs & radiation shields are strongly recommended for high temperature vertical tube furnaces to prevent heat loss & improve uniformity
Modified atmosphere and vacuum assemblies are available
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Oxygen sensor for inert gas packages

Technical details

View inside
outer case
ceramic fibre end insulation
ceramic fibre case insulation
heating elements
ceramic fibre inner insulation

Content may be subject to modifications or corrections

Description

Standard features

1800℃ maximum operating temperature
Programmable 3216P1 controller
3-zone models fitted with 1 x programmable 3216P1 and 2 x 3216CC end zone controllers,with retransmission of setpoint
Over-temperature protection
Accepts work tubes with outer diameters up to 100 mm for use with modified atmosphere
Accepts work tubes with outer diameters up to 200 mm for use in air
Heated lengths of 100,250,300 or 600 mm
Low thermal mass ceramic fibre insulation
Vertically hanging,high quality MoSi2 heating elements
Rectangular housing with holes for convection cooling
Available with 1 – 3 heating zones
Furnace comes with separate control box with 3 m cable,plug and socket

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
A range of additional work tubes is available in a variety of materials
Insulation plugs & radiation shields are strongly recommended for high temperature vertical tube furnaces to prevent heat loss & improve uniformity
Modified atmosphere and vacuum assemblies are available
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Oxygen sensor for inert gas packages

Technical details

View inside
outer case
ceramic fibre end insulation
ceramic fibre case insulation
heating elements
ceramic fibre inner insulation

Content may be subject to modifications or corrections

Max. temp. [℃] 1600, 1700, 1800
Dimensions: External H x W x D [mm] 620 x 890 x 520
Max. power [W] 10900
Furnace Weight [kg] 120