-- Type to Search Products --

Carbolite 3-Zone Large Tube Furnaces TZF TZF-12-38-850 1200℃

The CTF single zone and TZF 3-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube.

This simple and economical design of both the CTF and TZF provides a tube furnace that can be used without the need to purchase an additional work tube.

However,should vacuum or a modified atmosphere be required,it is necessary to use a separate additional slide-in work tube in order to provide the required length needed to fit end seals.Similarly,in some circumstances a work tube that has different physical or chemical properties to the fixed work tube may be required.

The TZF heated length is divided into 3 zones.An extended uniform zone in the mid-section of the work tube is achieved with the use of end zone controllers which track the centre zone for temperature and compensate for the loss of heat from the tube furnace ends.The use of an additional slide-in work tube protects the integral work tube for the TZF and heating element.

SKU: TZF-12-38-850 Categories: , Tag:

Carbolite 3-Zone Large Tube Furnaces TZF TZF-12-38-850 1200℃

Technical Specification

Max. temp. [℃] 1200
Heat-up time [mins]
Max. continuous operating temp. [℃] 1100
Dimensions: Usable chamber H x W x D [mm]
Dimensions: External H x W x D [mm] 430 x 900 x 375
Dimensions: External with door open H x W x D [mm]
Temperature uniformity of ±5℃ within H x W x D [mm]
Volume [litres]
Max. power [W] 2850
Holding power [W]
Thermocouple type N
Furnace Weight [kg] 27
Retort Volume [litres]
Max. temp with Retort
Dimensions External Overall Size
Retort Internal Size
Uniform volume ± 5℃
Uniformi
The CTF single zone and TZF 3-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube.

This simple and economical design of both the CTF and TZF provides a tube furnace that can be used without the need to purchase an additional work tube.

However,should vacuum or a modified atmosphere be required,it is necessary to use a separate additional slide-in work tube in order to provide the required length needed to fit end seals.Similarly,in some circumstances a work tube that has different physical or chemical properties to the fixed work tube may be required.

The TZF heated length is divided into 3 zones.An extended uniform zone in the mid-section of the work tube is achieved with the use of end zone controllers which track the centre zone for temperature and compensate for the loss of heat from the tube furnace ends.The use of an additional slide-in work tube protects the integral work tube for the TZF and heating element.
Standard features

1200℃ maximum operating temperature
Carbolite Gero 301 controller,with single ramp to set-point & process timer
65 mm,75 mm or 100 mm work tube inner diameters (CTF)
38 mm,65 mm,75 mm or 100 mm work tube inner diameters (TZF)
450,550,700,850 or 900 mm heated length (varies with model)
Integral wirewound work tube
Delayed start/process timer function as standard (CTF)
Horizontal configuration mounted on control module
TZF provides a longer uniform zone than can be achieved in the CTF single zone tube furnace

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of additional work tubes,end seals and work tube packages is available for use with modified atmosphere and/or vacuum
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Insulation plugs & radiation shields to prevent heat loss & improve uniformity
Retransmission of setpoint control configuration to facilitate programmed cooling (TFZ)
Alternative mounting options are available
Optionally configured for 2 phase electrical supply
Content may be subject to modifications or corrections

Description

Standard features

1200℃ maximum operating temperature
Carbolite Gero 301 controller,with single ramp to set-point & process timer
65 mm,75 mm or 100 mm work tube inner diameters (CTF)
38 mm,65 mm,75 mm or 100 mm work tube inner diameters (TZF)
450,550,700,850 or 900 mm heated length (varies with model)
Integral wirewound work tube
Delayed start/process timer function as standard (CTF)
Horizontal configuration mounted on control module
TZF provides a longer uniform zone than can be achieved in the CTF single zone tube furnace

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of additional work tubes,end seals and work tube packages is available for use with modified atmosphere and/or vacuum
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Insulation plugs & radiation shields to prevent heat loss & improve uniformity
Retransmission of setpoint control configuration to facilitate programmed cooling (TFZ)
Alternative mounting options are available
Optionally configured for 2 phase electrical supply
Content may be subject to modifications or corrections

Max. temp. [℃] 1200
Max. continuous operating temp. [℃] 1100
Dimensions: External H x W x D [mm] 430 x 900 x 375
Max. power [W] 2850
Thermocouple type N
Furnace Weight [kg] 27
Product Documentation Pdf -1

Similar Products

Carbolite High Temperature Laboratory Chamber Furnace (25L) 1700°C #HTF1725-230TX

View Product

Carbolite High Temperature Laboratory Chamber Furnace (4L) 1800°C #HTF1804-208SN

View Product

Carbolite High Temperature Chamber Furnace (35L) 1600°C #RHF1635-230TX

View Product

Carbolite High Temperature Chamber Furnace (15L) 1500°C #RHF1515-230TX

View Product