-- Type to Search Products --

Carbolite Burn-off Chamber Furnaces CWF-B 12-13 1200℃

The CWF range of general purpose laboratory chamber furnaces is bench mounted.Models are available in five sizes with a maximum operating temperature up to 1300℃.

The airflow in the CWF-B furnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the furnace.

The CWF-BAL furnace with integral balance can be used for thermogravimetric analysis (TGA) and loss on ignition (LOI) applications,where weight change of the sample must be monitored during the heating process.This is required,for example,in the determination of inorganic matter content in materials such as cement,lime,calcinated bauxite and refractories.For applications involving organic matter content,please refer to the AAF-BAL.

SKU: CWF-B-12-13 Categories: , Tag:

Carbolite Burn-off Chamber Furnaces CWF-B 12-13 1200℃

Technical Specification

Max. temp. [℃] 1200
Heat-up time [mins] 130
Max. continuous operating temp. [℃] 1100
Dimensions: Usable chamber H x W x D [mm] 200 x 200 x 325
Dimensions: External H x W x D [mm] 655 x 435 x 610
Dimensions: External with door open H x W x D [mm] 905 x 435 x 610
Temperature uniformity of ±5℃ within H x W x D [mm] n/a
Volume [litres] 13
Max. power [W] 3100
Holding power [W]
Thermocouple type
Furnace Weight [kg] 47
Retort Volume [litres]
Max. temp with Retort
Dimensions External Overall Size
Retort Internal Size
Uniform volume ± 5℃
Uniformi
The CWF range of general purpose laboratory chamber furnaces is bench mounted.Models are available in five sizes with a maximum operating temperature up to 1300℃.

The airflow in the CWF-B furnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the furnace.

The CWF-BAL furnace with integral balance can be used for thermogravimetric analysis (TGA) and loss on ignition (LOI) applications,where weight change of the sample must be monitored during the heating process.This is required,for example,in the determination of inorganic matter content in materials such as cement,lime,calcinated bauxite and refractories.For applications involving organic matter content,please refer to the AAF-BAL.
Standard features

1100℃,1200℃ or 1300℃ maximum operating temperature
5,13,23,36 or 65 litre chamber volumes
Carbolite Gero 301 controller,with single ramp to set-point & process timer
Vertical lift door keeps heated surface away from the user
Soft closing door on 5,13,21 & 23 litre models
Delayed start/process timer function as standard
Hard wearing alumina element carrier,furnace entrance and hearth
Energy efficient low thermal mass insulation
Free radiating wire wound elements for optimum uniformity
Easy access to elements & controls simplifies maintenance & servicing
CWF-B: Enhanced airflow from tall chimney & door vents for full combustion
CWF-BAL: With integrated balance that runs independently of the furnace control system
CWF-BAL: Software supplied with the balance may be used to monitor the balance reading via a computer
CWF-BAL: Maximum capacity of balance is 3 kg with a resolution of 0.01 g (other capacities available)

Options (specify these at time of order)

Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
A range of metallic retorts to work with modified atmospheres up to 1150℃
AMS2750E Nadcap compatible models are available for aerospace applications
CWF-BAL: 8 kg balance with a resolution of 0.1 g

Technical details

Airflow in CWF-B
Air inlets through the door plug
Airflow through the chamber promotes burning of the samples
Chimney pulls air through the chamber
Content may be subject to modifications or corrections

Description

Standard features

1100℃,1200℃ or 1300℃ maximum operating temperature
5,13,23,36 or 65 litre chamber volumes
Carbolite Gero 301 controller,with single ramp to set-point & process timer
Vertical lift door keeps heated surface away from the user
Soft closing door on 5,13,21 & 23 litre models
Delayed start/process timer function as standard
Hard wearing alumina element carrier,furnace entrance and hearth
Energy efficient low thermal mass insulation
Free radiating wire wound elements for optimum uniformity
Easy access to elements & controls simplifies maintenance & servicing
CWF-B: Enhanced airflow from tall chimney & door vents for full combustion
CWF-BAL: With integrated balance that runs independently of the furnace control system
CWF-BAL: Software supplied with the balance may be used to monitor the balance reading via a computer
CWF-BAL: Maximum capacity of balance is 3 kg with a resolution of 0.01 g (other capacities available)

Options (specify these at time of order)

Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
A range of metallic retorts to work with modified atmospheres up to 1150℃
AMS2750E Nadcap compatible models are available for aerospace applications
CWF-BAL: 8 kg balance with a resolution of 0.1 g

Technical details

Airflow in CWF-B
Air inlets through the door plug
Airflow through the chamber promotes burning of the samples
Chimney pulls air through the chamber
Content may be subject to modifications or corrections

Max. temp. [℃] 1200
Heat-up time [mins] 130
Max. continuous operating temp. [℃] 1100
Dimensions: Usable chamber H x W x D [mm] 200 x 200 x 325
Dimensions: External H x W x D [mm] 655 x 435 x 610
Dimensions: External with door open H x W x D [mm] 905 x 435 x 610
Temperature uniformity of ±5℃ within H x W x D [mm] n/a
Volume [litres] 13
Max. power [W] 3100
Furnace Weight [kg] 47