-- Type to Search Products --

Carbolite Single Zone Horizontal Split Tube Furnaces HST HST-12-300 1200℃

The split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body.The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters.

These furnaces comprise a furnace body which is hinged and split into two halves along its length.This makes exchange of work tubes easier and also enables the tube furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item.The work tube length is dependent on the application,for example,for use with modified atmosphere or vacuum.The use of a separate work tube has the advantage of protecting the heating elements from damage or contamination.

The HZS three zone tube furnaces offer excellent uniformity which results from division of the heated length into three zones,each with its own controller and thermocouple.

SKU: HST-12-300 Categories: , Tag:

Carbolite Single Zone Horizontal Split Tube Furnaces HST HST-12-300 1200℃

Technical Specification

Max. temp. [℃] 1200
Heat-up time [mins] 45
Max. continuous operating temp. [℃]
Dimensions: Usable chamber H x W x D [mm]
Dimensions: External H x W x D [mm] 350 x 450 x 410
Dimensions: External with door open H x W x D [mm]
Temperature uniformity of ±5℃ within H x W x D [mm]
Volume [litres]
Max. power [W] 1500
Holding power [W] 850
Thermocouple type N
Furnace Weight [kg] 28
Retort Volume [litres]
Max. temp with Retort
Dimensions External Overall Size
Retort Internal Size
Uniform volume ± 5℃
Uniformi
The split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body.The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters.

These furnaces comprise a furnace body which is hinged and split into two halves along its length.This makes exchange of work tubes easier and also enables the tube furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item.The work tube length is dependent on the application,for example,for use with modified atmosphere or vacuum.The use of a separate work tube has the advantage of protecting the heating elements from damage or contamination.

The HZS three zone tube furnaces offer excellent uniformity which results from division of the heated length into three zones,each with its own controller and thermocouple.
Standard features

1200℃ maximum operating temperature
Carbolite Gero 301 controller,with single ramp to set-point & process timer
Accepts worktubes with outer diameters up to 110 mm
Heated lengths,single zone 200,300,400,450,600 or 900 mm (HST)
Heated lengths,3-zone 600 or 900 mm (HZS)
Horizontal furnace with a separate control module on a 2 metre conduit
Furnace splits into two halves to accommodate work tubes or samples fixed into a test rig
Wire elements in high quality vacuum formed insulation ensure fast heat up,excellent temperature uniformity and short cool down times
HZS: End zone control is via back to back thermocouples
HZS: End zones of 150 mm each end

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of additional work tubes,end seals and work tube packages is available for use with modified atmosphere and/or vacuum
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Insulation plugs,gas tight end seals and vacuum connections available
Wide choice of tube diameters and materials is available: eg quartz,ceramic,metal
Available with 'L' stand for vertical and horizontal use
Control module on longer 6 metre conduit
HZS: Three equal length zones
HZS: If programmed cooling is required,programmable controllers capable of retransmission of setpoint can be supplied
Content may be subject to modifications or corrections

Description

Standard features

1200℃ maximum operating temperature
Carbolite Gero 301 controller,with single ramp to set-point & process timer
Accepts worktubes with outer diameters up to 110 mm
Heated lengths,single zone 200,300,400,450,600 or 900 mm (HST)
Heated lengths,3-zone 600 or 900 mm (HZS)
Horizontal furnace with a separate control module on a 2 metre conduit
Furnace splits into two halves to accommodate work tubes or samples fixed into a test rig
Wire elements in high quality vacuum formed insulation ensure fast heat up,excellent temperature uniformity and short cool down times
HZS: End zone control is via back to back thermocouples
HZS: End zones of 150 mm each end

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of additional work tubes,end seals and work tube packages is available for use with modified atmosphere and/or vacuum
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Insulation plugs,gas tight end seals and vacuum connections available
Wide choice of tube diameters and materials is available: eg quartz,ceramic,metal
Available with 'L' stand for vertical and horizontal use
Control module on longer 6 metre conduit
HZS: Three equal length zones
HZS: If programmed cooling is required,programmable controllers capable of retransmission of setpoint can be supplied
Content may be subject to modifications or corrections

Max. temp. [℃] 1200
Heat-up time [mins] 45
Dimensions: External H x W x D [mm] 350 x 450 x 410
Max. power [W] 1500
Holding power [W] 850
Thermocouple type N
Furnace Weight [kg] 28
Product Documentation Pdf -1

Similar Products

Carbolite High Temperature Chamber Furnace (8L) 1400°C #RHF1408-230SN

View Product

Carbolite High Temperature Laboratory Chamber Furnace (27L) 1800°C #HTF1827-230TX

View Product

Carbolite High Temperature Chamber Furnace (8L) 1600°C #RHF1608-230TX

View Product

Carbolite High Temperature Laboratory Chamber Furnace (4L) 1800°C #HTF1804-208SN

View Product