-- Type to Search Products --

Carbolite Single Zone Vertical Split Tube Furnaces VST VST-12-450 1200℃

The split tube furnace range VST (single zone) and TVS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body.The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters.

These furnaces comprise a furnace body which is hinged and split into two halves along its length.This makes exchange of work tubes easier and also enables the furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.This design is particularly suitable for incorporation into extension test and creep test apparatus.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item.The work tube length is dependent on the application eg for use with modified atmosphere or vacuum.The use of a separate work tube has the advantage of protecting the heating elements from damage or contamination.

The “near-hinge” format is standard,an alternative option that can be specified at the time of purchase is the “far-hinge” format,where the pivot of hinges is further from the centre line of the furnace to enable a wider opening action.

SKU: VST-12-450 Categories: , Tag:

Carbolite Single Zone Vertical Split Tube Furnaces VST VST-12-450 1200℃

Technical Specification

Max. temp. [℃] 1200
Heat-up time [mins] 53
Max. continuous operating temp. [℃]
Dimensions: Usable chamber H x W x D [mm]
Dimensions: External H x W x D [mm] 890 x 500 x 500
Dimensions: External with door open H x W x D [mm]
Temperature uniformity of ±5℃ within H x W x D [mm]
Volume [litres]
Max. power [W] 2250
Holding power [W] 950
Thermocouple type N
Furnace Weight [kg] 30
Retort Volume [litres]
Max. temp with Retort
Dimensions External Overall Size
Retort Internal Size
Uniform volume ± 5℃
Uniformi
The split tube furnace range VST (single zone) and TVS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body.The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters.

These furnaces comprise a furnace body which is hinged and split into two halves along its length.This makes exchange of work tubes easier and also enables the furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.This design is particularly suitable for incorporation into extension test and creep test apparatus.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item.The work tube length is dependent on the application eg for use with modified atmosphere or vacuum.The use of a separate work tube has the advantage of protecting the heating elements from damage or contamination.

The "near-hinge" format is standard,an alternative option that can be specified at the time of purchase is the "far-hinge" format,where the pivot of hinges is further from the centre line of the furnace to enable a wider opening action.
Standard features

1200℃ maximum operating temperature
Carbolite Gero 301 controller,with single ramp to set-point & process timer
Accepts worktubes with outer diameters up to 110 mm
Heated lengths,single zone 200,300,400,450,600 or 900 mm (VST)
Heated lengths,3-zone 600 or 900 mm (TVS)
Furnace splits into two halves to accommodate work tubes or samples fixed into a test rig
Wire elements in high quality vacuum formed insulation ensure fast heat up,excellent temperature uniformity and short cool down times
Supplied in 'near-hinge' configuration complete with stand
Vertical furnace with a separate control module on a 2 metre conduit
VST: End zone control is via back to back thermocouples
VST: End zones of 150 mm each end

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of additional work tubes,end seals and work tube packages is available for use with modified atmosphere and/or vacuum
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Insulation plugs,gas tight end seals and vacuum connections available
'Far-hinge' configuration providing wider opening of furnace body
Wide choice of tube diameters and materials is available: eg quartz,ceramic,metal
Control module on longer 6 metre conduit
TVS: Three equal length zones
Content may be subject to modifications or corrections

Description

Standard features

1200℃ maximum operating temperature
Carbolite Gero 301 controller,with single ramp to set-point & process timer
Accepts worktubes with outer diameters up to 110 mm
Heated lengths,single zone 200,300,400,450,600 or 900 mm (VST)
Heated lengths,3-zone 600 or 900 mm (TVS)
Furnace splits into two halves to accommodate work tubes or samples fixed into a test rig
Wire elements in high quality vacuum formed insulation ensure fast heat up,excellent temperature uniformity and short cool down times
Supplied in 'near-hinge' configuration complete with stand
Vertical furnace with a separate control module on a 2 metre conduit
VST: End zone control is via back to back thermocouples
VST: End zones of 150 mm each end

Options (specify these at time of order)

A range of sophisticated digital controllers,multi-segment programmers and data loggers is available. These can be fitted with RS232,RS485 or Ethernet communications
Over-temperature protection (recommended to protect valuable contents & for unattended operation)
A range of additional work tubes,end seals and work tube packages is available for use with modified atmosphere and/or vacuum
Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
Insulation plugs,gas tight end seals and vacuum connections available
'Far-hinge' configuration providing wider opening of furnace body
Wide choice of tube diameters and materials is available: eg quartz,ceramic,metal
Control module on longer 6 metre conduit
TVS: Three equal length zones
Content may be subject to modifications or corrections

Max. temp. [℃] 1200
Heat-up time [mins] 53
Dimensions: External H x W x D [mm] 890 x 500 x 500
Max. power [W] 2250
Holding power [W] 950
Thermocouple type N
Furnace Weight [kg] 30