-- Type to Search Products --

Cress Furnaces Bench Top Heat Treating Furnaces C162010-PM3T 1093℃

N/A

SKU: C162010-PM3T Categories: , Tag:

Cress Furnaces Bench Top Heat Treating Furnaces C162010-PM3T 1093℃

Technical Specification

Brick Thickness
Max. No. of Cone / Max. Temperature 1093℃
Size (W x D x H)
Chamber Opening
Depth
Volume
Outside Width
Outside Depth
Limit Timer
Voltage
Amps
Kilowatts 9 KW
Frequency
Certification
Amp Fuse Size
Short Wire Size
Plug Type
Shipping Weight
Height
Options
Phase
Note
Inside Depth
Current
Chamber Width 16 in
Chamber Length 20 in
Chamber Height 10 in
Overall Width 29 in
Overall Length 34 in
Overall Height 31 in
Max. Intermittent Temperature 2250 ℉
Weight 400 lb
Options
Options ? Embedded elements and Clean air exhaust system High limit control Inlet port for protective inert Atmosphere Stands and Quench tanks
Upper Chamber Width
Upper Chamber Length
Upper Chamber Height
Lower C
N/A
Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300℃ to 2250℃ 25 are required.They are used for heat treating metal, assaying and all types of testing.2400℃ F maximum temperature option available at additional cost. Temperature Controls: Auto tuning microprocessor-based controller. Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates. General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone.The walls and door are constructed of the finest quality insulating fire brick backed up by 1800℃ block insulation. Safety switch: These models come equipped with dual door safety Switches.when the door is opened, power is disconnected from the heating Elements. Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator. A Kaowool rope seal is installed on the door where it meets the Chamber.

Description

Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300℃ to 2250℃ 25 are required.They are used for heat treating metal, assaying and all types of testing.2400℃ F maximum temperature option available at additional cost.
Temperature Controls: Auto tuning microprocessor-based controller.

Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.

General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone.The walls and door are constructed of the finest quality insulating fire brick backed up by 1800℃ block insulation.

Safety switch: These models come equipped with dual door safety Switches.when the door is opened, power is disconnected from the heating Elements.

Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator.

A Kaowool rope seal is installed on the door where it meets the Chamber.

Max. No. of Cone / Max. Temperature 1093℃
Kilowatts 9 KW
Chamber Width 16 in
Chamber Length 20 in
Chamber Height 10 in
Overall Width 29 in
Overall Length 34 in
Overall Height 31 in
Max. Intermittent Temperature 2250 ℉
Weight 400 lb
Options ? Embedded elements and Clean air exhaust system High limit control Inlet port for protective inert Atmosphere Stands and Quench tanks