-- Type to Search Products --

Cress Furnaces Bench Top Tempering Furnaces C1232DW-PM3T 537℃

N/A

SKU: C1232DW-PM3T Categories: , Tag:

Cress Furnaces Bench Top Tempering Furnaces C1232DW-PM3T 537℃

Technical Specification

Brick Thickness
Max. No. of Cone / Max. Temperature 537℃
Size (W x D x H)
Chamber Opening
Depth
Volume
Outside Width
Outside Depth
Limit Timer
Voltage
Amps
Kilowatts 5 KW
Frequency
Certification
Amp Fuse Size
Short Wire Size
Plug Type
Shipping Weight
Height
Options
Phase
Note
Inside Depth
Current
Chamber Width 12 in
Chamber Length 29 in
Chamber Height 8 in
Overall Width 25 in
Overall Length 54 in
Overall Height 28 in
Max. Intermittent Temperature 1250 ℉
Weight 500 lb
Options
Options ? High limit controls Stands and quench tanks
Upper Chamber Width
Upper Chamber Length
Upper Chamber Height
Lower C
N/A
Draw Units: These models are equipped with a stainless steel fan and motor for forced convection temperature uniformity. Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300-1250℃. ±10℉ are required.They are used for such purposes as tempering, annealing and stress relieving.2000℃ maximum temperature option is available for all models at additional cost. Temperature controls: Auto tuning microprocessor-based controller and solid state relays for precise temperature control. Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates. General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone.The walls and door are constructed of the finest quality insulating fire brick backed up by 1800℃ F block insulation.Comes complete with cord and plug. Safety Switch: These models come equipped with dual safety switches.When the door is opened, power is disconnected from the heating elements and fan motor. Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator. A kaowool Rope seal is installed on the door where it meets the chamber.

Description

Draw Units: These models are equipped with a stainless steel fan and motor for forced convection temperature uniformity.

Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300-1250℃. ±10℉ are required.They are used for such purposes as tempering, annealing and stress relieving.2000℃ maximum temperature option is available for all models at additional cost.

Temperature controls: Auto tuning microprocessor-based controller and solid state relays for precise temperature control.

Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.

General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone.The walls and door are constructed of the finest quality insulating fire brick backed up by 1800℃ F block insulation.Comes complete with cord and plug.

Safety Switch: These models come equipped with dual safety switches.When the door is opened, power is disconnected from the heating elements and fan motor.

Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator.

A kaowool Rope seal is installed on the door where it meets the chamber.

Max. No. of Cone / Max. Temperature 537℃
Kilowatts 5 KW
Chamber Width 12 in
Chamber Length 29 in
Chamber Height 8 in
Overall Width 25 in
Overall Length 54 in
Overall Height 28 in
Max. Intermittent Temperature 1250 ℉
Weight 500 lb
Options ? High limit controls Stands and quench tanks