-- Type to Search Products --

Cress Furnaces C-133 and C136 Cress Furnaces C133-PM3T 1093℃

N/A

SKU: C133-PM3T Categories: , Tag:

Cress Furnaces C-133 and C136 Cress Furnaces C133-PM3T 1093℃

Technical Specification

Brick Thickness
Max. No. of Cone / Max. Temperature 1093℃
Size (W x D x H)
Chamber Opening
Depth
Volume
Outside Width
Outside Depth
Limit Timer
Voltage
Amps
Kilowatts 3 KW
Frequency
Certification
Amp Fuse Size
Short Wire Size
Plug Type
Shipping Weight
Height
Options
Phase
Note
Inside Depth
Current
Chamber Width 11.5 in
Chamber Length 13 in
Chamber Height 8 in
Overall Width 26 in
Overall Length 28 in
Overall Height 24 in
Max. Intermittent Temperature 2250 ℉
Weight 200 lb
Options
Options ? Clean air exhaust system Dual chamber furnace Embedded elements Stainless steel port
Upper Chamber Width
Upper Chamber Length
Upper Chamber Height
Lower C
N/A
Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300℉ to 2250℃ F are required.They are used for heat treating metal, assaying and all types of testing.
Temperature Controls: Auto tuning microprocessor-based controller.

Elements: High temperature iron-aluminum alloy wire elements are coiled and mounted on the side wall in porcelain plates.

The C133 Has a bottom element mounted in groves in floor and covered by refractory heart plate.

General construction: Case is constructed of heavy gauge sheet steel and finished in gray hammertone.The easily operated, counter-balanced door is always away from operator.All walls and door are constructed of the finest quality insulating fire brick backed by 1800℃ F block insulation.Comes complete with cord and plug.

Safety switch: These models come equipped with two door safety switches.When door is opened, elements are disconnected from power source.Solid state zero voltage switching of power to elements.

Description

Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300℉ to 2250℃ F are required.They are used for heat treating metal, assaying and all types of testing.
Temperature Controls: Auto tuning microprocessor-based controller.

Elements: High temperature iron-aluminum alloy wire elements are coiled and mounted on the side wall in porcelain plates.

The C133 Has a bottom element mounted in groves in floor and covered by refractory heart plate.

General construction: Case is constructed of heavy gauge sheet steel and finished in gray hammertone.The easily operated, counter-balanced door is always away from operator.All walls and door are constructed of the finest quality insulating fire brick backed by 1800℃ F block insulation.Comes complete with cord and plug.

Safety switch: These models come equipped with two door safety switches.When door is opened, elements are disconnected from power source.Solid state zero voltage switching of power to elements.

Max. No. of Cone / Max. Temperature 1093℃
Kilowatts 3 KW
Chamber Width 11.5 in
Chamber Length 13 in
Chamber Height 8 in
Overall Width 26 in
Overall Length 28 in
Overall Height 24 in
Max. Intermittent Temperature 2250 ℉
Weight 200 lb
Options ? Clean air exhaust system Dual chamber furnace Embedded elements Stainless steel port