-- Type to Search Products --

Cress Furnaces C601 Cress Furnaces C601-PM3T 982℃

N/A

SKU: C601-PM3T Categories: ,

Cress Furnaces C601 Cress Furnaces C601-PM3T 982℃

Technical Specification

Brick Thickness
Max. No. of Cone / Max. Temperature 982℃
Size (W x D x H)
Chamber Opening
Depth
Volume
Outside Width
Outside Depth
Limit Timer
Voltage
Amps
Kilowatts 1.4 KW
Frequency
Certification
Amp Fuse Size
Short Wire Size
Plug Type
Shipping Weight
Height
Options
Phase
Note
Inside Depth
Current
Chamber Width 8.5 in
Chamber Length 10 in
Chamber Height 6.5 in
Overall Width 15.5 in
Overall Length 17 in
Overall Height 22 in
Max. Intermittent Temperature 2000 ℉
Weight 100 lb
Options Dual Chamber Stainless steel case
Options ?
Upper Chamber Width
Upper Chamber Length
Upper Chamber Height
Lower C
N/A
Uses: These models are designed for those users who require automatic temperature controlled furnaces from 250℃ F to 2000℃ F (Model C-601) or up to 2250℃ F (Model C401H)
At A Low Cost: An ideal unit for many of the small jobs found in Tool rooms, Production Shops or Laboratory.

Temperature Control: Auto tuning microprocessor-based controller.

Elements: C-601 chrome nickel wire.C401H-high temperature iron-aluminum wire.

Wiring: furnace is completely wired and equipped with cord ready to plug into a 115 volt outlet.control, relay and wiring connections are enclosed on the base.

General construction: Furnace case of sheet steel is assembled by use of electrical welding and sheet metal screws.The spring counter-balance door rises vertically on lever arrangement keeping the hot face away from operator.The C401H walls and door are constructed of high quality insulating brick backed by 1800℃ F block insulation.Furnace is finished in heat resistant hammer tone gray.

Safety switch: These models come equipped with a door safety switch.when door is opened, power is disconnected from the heating elements.

Description

Uses: These models are designed for those users who require automatic temperature controlled furnaces from 250℃ F to 2000℃ F (Model C-601) or up to 2250℃ F (Model C401H)
At A Low Cost: An ideal unit for many of the small jobs found in Tool rooms, Production Shops or Laboratory.

Temperature Control: Auto tuning microprocessor-based controller.

Elements: C-601 chrome nickel wire.C401H-high temperature iron-aluminum wire.

Wiring: furnace is completely wired and equipped with cord ready to plug into a 115 volt outlet.control, relay and wiring connections are enclosed on the base.

General construction: Furnace case of sheet steel is assembled by use of electrical welding and sheet metal screws.The spring counter-balance door rises vertically on lever arrangement keeping the hot face away from operator.The C401H walls and door are constructed of high quality insulating brick backed by 1800℃ F block insulation.Furnace is finished in heat resistant hammer tone gray.

Safety switch: These models come equipped with a door safety switch.when door is opened, power is disconnected from the heating elements.

Max. No. of Cone / Max. Temperature 982℃
Kilowatts 1.4 KW
Chamber Width 8.5 in
Chamber Length 10 in
Chamber Height 6.5 in
Overall Width 15.5 in
Overall Length 17 in
Overall Height 22 in
Max. Intermittent Temperature 2000 ℉
Weight 100 lb
Options Dual Chamber Stainless steel case