-- Type to Search Products --

Paragon Furnaces Bead CALDERA-BC 1093℃

Caldera-BC Bead Annealing Collar
The basic Caldera is part of a kiln expansion system . When you are ready to anneal glass beads,add the modular Caldera-BC collar . It is a kiln section that stacks onto the main Caldera kiln base . The Caldera-BC collar has a 7½x 2 door on the side for annealing glass beads . The collar includes a brushed stainless steel mandrel holder . Insert the mandrels into the kiln . The bead door stays partially open while the glass anneals . The kiln ships with a rare earth magnet to hold the bead door open .
The Caldera-BC collar adds 4 ½ of height to the main kiln . The collar has no heating elements . The Collar is made of 2½thick hand-selected insulating refractory firebricks . The insulating firebricks,wrapped in heavy-gauge stainless steel,soak up heat for slow,efficient cooling .
To strengthen the firingchamber,the firebrick corners are fitted together with L-shaped notches . This type of joint lasts longer than the butted joint and the picture frame mitered joint found on competitive brands . Rugged construction makes this kiln a little workhorse . For easy maintenance,the stainless steel case includes case tighteners . The Caldera-BC is made in Mesquite,Texas USA by skilled craftspeople .
Imagine the intricate glass beads you could anneal in this kiln . Also use the collar to add depth to the Caldera or Caldera-S for general glass fusing . The Caldera-BC bead collar will add to your creative enjoyment .
The Caldera-BC can ship by UPS/FedEx for lower shipping cost and faster service . Specially designed cartons and foam padding assure that the kiln will arrive safely .

SKU: CALDERA-BC Categories: , Tag:

Paragon Furnaces Bead CALDERA-BC 1093℃

Technical Specification

Max. Temperature 1093℃
Amps 14
Phase 0
Watts 0
Nema
Breaker Size 0
Circuit Copper Wire Size 0 gauge
TUV tested to CSA and UL Standard 499 Y
CE N
Control Type No Control System
Voltage
Hertz
Kiln Type Top Loading Square
Side 4
Chamber Volume 16.00 CU.FT.(453 litres)
Dimensions: Chamber (W x D x H) L= 8.00 IN(203 mm) x W= 8.00 IN (203 mm ) x D= 4.50 IN (114 mm)
Dimensions: External (W x D x H) 13.00W x 13.00D x 4.50H Inches (330W x 330D x 114H mm)
Ship Size 16.50W x 16.50D x 8.50H Inches (419W x 419D x 216H mm)
Ship Weight 14.00 Lbs.(6.35 Kg.)
Ship Method & Notations This Kiln Ships Via UPS/FedEx
Part Number S0743-4
The Outer Size of the Kiln and the Shipping Size Left to Right; Depth = Front to Back; Height = Top to Bottom
Doorway Clearance Needed 13.00 Inches (330.20 mm)
Caldera-BC Bead Annealing Collar
The basic Caldera is part of a kiln expansion system . When you are ready to anneal glass beads,add the modular Caldera-BC collar . It is a kiln section that stacks onto the main Caldera kiln base . The Caldera-BC collar has a 7½x 2 door on the side for annealing glass beads . The collar includes a brushed stainless steel mandrel holder . Insert the mandrels into the kiln . The bead door stays partially open while the glass anneals . The kiln ships with a rare earth magnet to hold the bead door open .
The Caldera-BC collar adds 4 ½ of height to the main kiln . The collar has no heating elements . The Collar is made of 2½thick hand-selected insulating refractory firebricks . The insulating firebricks,wrapped in heavy-gauge stainless steel,soak up heat for slow,efficient cooling .
To strengthen the firingchamber,the firebrick corners are fitted together with L-shaped notches . This type of joint lasts longer than the butted joint and the picture frame mitered joint found on competitive brands . Rugged construction makes this kiln a little workhorse . For easy maintenance,the stainless steel case includes case tighteners . The Caldera-BC is made in Mesquite,Texas USA by skilled craftspeople .
Imagine the intricate glass beads you could anneal in this kiln . Also use the collar to add depth to the Caldera or Caldera-S for general glass fusing . The Caldera-BC bead collar will add to your creative enjoyment .
The Caldera-BC can ship by UPS/FedEx for lower shipping cost and faster service . Specially designed cartons and foam padding assure that the kiln will arrive safely .
Caldera-BC Bead Annealing Collar

The basic Caldera is part of a kiln expansion system . When you are ready to anneal glass beads,add the modular Caldera-BC collar . It is a kiln section that stacks onto the main Caldera kiln base . The Caldera-BC collar has a 7½x 2 door on the side for annealing glass beads . The collar includes a brushed stainless steel mandrel holder . Insert the mandrels into the kiln . The bead door stays partially open while the glass anneals . The kiln ships with a rare earth magnet to hold the bead door open .
The Caldera-BC collar adds 4 ½ of height to the main kiln . The collar has no heating elements . The Collar is made of 2½thick hand-selected insulating refractory firebricks . The insulating firebricks,wrapped in heavy-gauge stainless steel,soak up heat for slow,efficient cooling .
To strengthen the firingchamber,the firebrick corners are fitted together with L-shaped notches . This type of joint lasts longer than the butted joint and the picture frame mitered joint found on competitive brands . Rugged construction makes this kiln a little workhorse . For easy maintenance,the stainless steel case includes case tighteners . The Caldera-BC is made in Mesquite,Texas USA by skilled craftspeople .
Imagine the intricate glass beads you could anneal in this kiln . Also use the collar to add depth to the Caldera or Caldera-S for general glass fusing . The Caldera-BC bead collar will add to your creative enjoyment .
The Caldera-BC can ship by UPS/FedEx for lower shipping cost and faster service . Specially designed cartons and foam padding assure that the kiln will arrive safely .
Warning for the Caldera kiln equipped with a lid safety switch and collar
The Caldera kiln was intended to be a stackable kiln with a separate lid and bottom . However,the lid must be hinged to the Caldera body when a lid safety switch is installed . To stabilize a Caldera kiln that has a hinged lid,we attach the kiln body and kiln bottom together with two latches .
If an unlatched collar (enameling,bead,or extension) is mounted between the Caldera body and the kiln bottom,care must be taken when opening the hinged lid . Do not open the lid past 90 degrees (where the lid is straight up) unless the lid leans against a heat-proof support behind the kiln .
Designed for production

Paragon's warranty is not affected by frequency of use . Fire your new kiln every day if you want,even in commercial settings . That will have no effect on the warranty period .

Description

Caldera-BC Bead Annealing Collar

The basic Caldera is part of a kiln expansion system . When you are ready to anneal glass beads,add the modular Caldera-BC collar . It is a kiln section that stacks onto the main Caldera kiln base . The Caldera-BC collar has a 7½x 2 door on the side for annealing glass beads . The collar includes a brushed stainless steel mandrel holder . Insert the mandrels into the kiln . The bead door stays partially open while the glass anneals . The kiln ships with a rare earth magnet to hold the bead door open .
The Caldera-BC collar adds 4 ½ of height to the main kiln . The collar has no heating elements . The Collar is made of 2½thick hand-selected insulating refractory firebricks . The insulating firebricks,wrapped in heavy-gauge stainless steel,soak up heat for slow,efficient cooling .
To strengthen the firingchamber,the firebrick corners are fitted together with L-shaped notches . This type of joint lasts longer than the butted joint and the picture frame mitered joint found on competitive brands . Rugged construction makes this kiln a little workhorse . For easy maintenance,the stainless steel case includes case tighteners . The Caldera-BC is made in Mesquite,Texas USA by skilled craftspeople .
Imagine the intricate glass beads you could anneal in this kiln . Also use the collar to add depth to the Caldera or Caldera-S for general glass fusing . The Caldera-BC bead collar will add to your creative enjoyment .
The Caldera-BC can ship by UPS/FedEx for lower shipping cost and faster service . Specially designed cartons and foam padding assure that the kiln will arrive safely .
Warning for the Caldera kiln equipped with a lid safety switch and collar
The Caldera kiln was intended to be a stackable kiln with a separate lid and bottom . However,the lid must be hinged to the Caldera body when a lid safety switch is installed . To stabilize a Caldera kiln that has a hinged lid,we attach the kiln body and kiln bottom together with two latches .
If an unlatched collar (enameling,bead,or extension) is mounted between the Caldera body and the kiln bottom,care must be taken when opening the hinged lid . Do not open the lid past 90 degrees (where the lid is straight up) unless the lid leans against a heat-proof support behind the kiln .
Designed for production

Paragon's warranty is not affected by frequency of use . Fire your new kiln every day if you want,even in commercial settings . That will have no effect on the warranty period .

Max. Temperature 1093℃
Amps 14
Phase 0
Watts 0
Breaker Size 0
Circuit Copper Wire Size 0 gauge
TUV tested to CSA and UL Standard 499 Y
CE N
Control Type No Control System
Kiln Type Top Loading Square
Side 4
Chamber Volume 16.00 CU.FT.(453 litres)
Dimensions: Chamber (W x D x H) L= 8.00 IN(203 mm) x W= 8.00 IN (203 mm ) x D= 4.50 IN (114 mm)
Dimensions: External (W x D x H) 13.00W x 13.00D x 4.50H Inches (330W x 330D x 114H mm)
Ship Size 16.50W x 16.50D x 8.50H Inches (419W x 419D x 216H mm)
Ship Weight 14.00 Lbs.(6.35 Kg.)
Ship Method & Notations This Kiln Ships Via UPS/FedEx
Part Number S0743-4
The Outer Size of the Kiln and the Shipping Size Left to Right; Depth = Front to Back; Height = Top to Bottom
Doorway Clearance Needed 13.00 Inches (330.20 mm)