-- Type to Search Products --

Paragon Furnaces Glass PAT30-1 593℃

PAT30-1 Annealing Kiln
Expand the production capacity of your glass studio with the massive 19 .9-cubic-foot PAT30-1 glass annealing kiln . Make glass vases,bowls,and figurines without worrying about having enough annealing capacity .
The PAT30-1 is designed for annealing,so the maximum temperature is 1100℉ (593℃) . With this kiln,you are buying only the heating capacity that you need for annealing .
Level the kiln in minutes with levelers that are built into the feet .
The massive lid is easy to lift with Paragon’s LiteLid,which does away with cumbersome pulleys and cords and dramatically reduces lid weight . Unlike pulleys and weights,the LiteLid is self-contained on the kiln . There is no need to drill holes in the ceiling for pulleys . The LiteLid sharply reduces wear between the lid and top rim of firebrick . The truss and floating lid allow expansion of the lid . The PAT30-1 has three LiteLid assemblies .
The lid includes a 16 front handle and two side handles . A safety switch turns off power to the heating elements when you raise the lid . The controller remains powered and automatically resumes firingwhen you close the lid .
A fiber rope seal lines the inner lid surface on all four sides . The top of the firingchamber where the lid rests when closed is grooved to accept the rope seal for a tight fit .

SKU: PAT30-1 Categories: , Tag:

Paragon Furnaces Glass PAT30-1 593℃

Technical Specification

Max. Temperature 593℃
Amps 80
Phase 1
Watts 19200
Nema Direct
Breaker Size 100
Circuit Copper Wire Size 2 gauge
TUV tested to CSA and UL Standard 499 N
CE N
Control Type Sentry Xpress 4.0 Digital 3-key
Voltage 240
Hertz 60
Kiln Type Top Loading Square
Side 4
Chamber Volume 19.90 CU.FT. (563.51 litres)
Dimensions: Chamber (W x D x H) L= 62.50 IN(1588 mm) x W= 26.50 IN (673 mm ) x D= 20.50 IN (531 mm)
Dimensions: External (W x D x H) 84.00W x 49.00D x 37.50H Inches (2134W x 1245D x 953H mm)
Ship Size 86.00W x 53.00D x 44.00H Inches (2184W x 1346D x 1118H mm)
Ship Weight 1448.00 Lbs. (656.81 Kg.)
Ship Method & Notations This Kiln Ships Via Truck
Part Number PAT30-1
The Outer Size of the Kiln and the Shipping Size Left to Right; Depth = Front to Back; Height = Top to Bottom
Doorway Clearance Needed
PAT30-1 Annealing Kiln
Expand the production capacity of your glass studio with the massive 19 .9-cubic-foot PAT30-1 glass annealing kiln . Make glass vases,bowls,and figurines without worrying about having enough annealing capacity .
The PAT30-1 is designed for annealing,so the maximum temperature is 1100℉ (593℃) . With this kiln,you are buying only the heating capacity that you need for annealing .
Level the kiln in minutes with levelers that are built into the feet .
The massive lid is easy to lift with Paragon's LiteLid,which does away with cumbersome pulleys and cords and dramatically reduces lid weight . Unlike pulleys and weights,the LiteLid is self-contained on the kiln . There is no need to drill holes in the ceiling for pulleys . The LiteLid sharply reduces wear between the lid and top rim of firebrick . The truss and floating lid allow expansion of the lid . The PAT30-1 has three LiteLid assemblies .
The lid includes a 16 front handle and two side handles . A safety switch turns off power to the heating elements when you raise the lid . The controller remains powered and automatically resumes firingwhen you close the lid .
A fiber rope seal lines the inner lid surface on all four sides . The top of the firingchamber where the lid rests when closed is grooved to accept the rope seal for a tight fit .
PAT30-1 Annealing Kiln

Expand the production capacity of your glass studio with the massive 19 .9-cubic-foot PAT30-1 glass annealing kiln . Make glass vases,bowls,and figurines without worrying about having enough annealing capacity .
The PAT30-1 is designed for annealing,so the maximum temperature is 1100℉ (593℃) . With this kiln,you are buying only the heating capacity that you need for annealing .
Level the kiln in minutes with levelers that are built into the feet .
The massive lid is easy to lift with Paragon's LiteLid,which does away with cumbersome pulleys and cords and dramatically reduces lid weight . Unlike pulleys and weights,the LiteLid is self-contained on the kiln . There is no need to drill holes in the ceiling for pulleys . The LiteLid sharply reduces wear between the lid and top rim of firebrick . The truss and floating lid allow expansion of the lid . The PAT30-1 has three LiteLid assemblies .
The lid includes a 16 front handle and two side handles . A safety switch turns off power to the heating elements when you raise the lid . The controller remains powered and automatically resumes firingwhen you close the lid .
A fiber rope seal lines the inner lid surface on all four sides . The top of the firingchamber where the lid rests when closed is grooved to accept the rope seal for a tight fit .
The kiln heats from the four sides . Dropped,recessed brick grooves protect the elements for long life . The kiln is heavily insulated for economical operation . The insulating firebricks and fiberboard,wrapped in heavy-gauge steel,soak up heat for slow,efficient cooling:
4 thick top: 4 ceramic fiberboard
4½thick walls: 2 ceramic fiberboard and 2 .5 firebricks
3 thick firebrick bottom
Paragon's PAT30-1 is made for years of rigorous firingwith a heavy 2 tubular steel frame . A heat shield and 1 3/4 air gap between the kiln and ventilated switch box help keep electrical components cool for long,trouble-free service . Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation . Turn off power to the controller when the kiln is not in use using an on/off switch on the control panel .
Designed for production
Paragon's warranty is not affected by frequency of use . Fire your new kiln every day if you want,even in commercial settings . That will have no effect on the warranty period .
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry,black,blue,hot pink,jade,navy,purple,or turquoise . Scroll down to see color samples in the options section .

Description

PAT30-1 Annealing Kiln

Expand the production capacity of your glass studio with the massive 19 .9-cubic-foot PAT30-1 glass annealing kiln . Make glass vases,bowls,and figurines without worrying about having enough annealing capacity .
The PAT30-1 is designed for annealing,so the maximum temperature is 1100℉ (593℃) . With this kiln,you are buying only the heating capacity that you need for annealing .
Level the kiln in minutes with levelers that are built into the feet .
The massive lid is easy to lift with Paragon’s LiteLid,which does away with cumbersome pulleys and cords and dramatically reduces lid weight . Unlike pulleys and weights,the LiteLid is self-contained on the kiln . There is no need to drill holes in the ceiling for pulleys . The LiteLid sharply reduces wear between the lid and top rim of firebrick . The truss and floating lid allow expansion of the lid . The PAT30-1 has three LiteLid assemblies .
The lid includes a 16 front handle and two side handles . A safety switch turns off power to the heating elements when you raise the lid . The controller remains powered and automatically resumes firingwhen you close the lid .
A fiber rope seal lines the inner lid surface on all four sides . The top of the firingchamber where the lid rests when closed is grooved to accept the rope seal for a tight fit .
The kiln heats from the four sides . Dropped,recessed brick grooves protect the elements for long life . The kiln is heavily insulated for economical operation . The insulating firebricks and fiberboard,wrapped in heavy-gauge steel,soak up heat for slow,efficient cooling:
4 thick top: 4 ceramic fiberboard
4½thick walls: 2 ceramic fiberboard and 2 .5 firebricks
3 thick firebrick bottom
Paragon's PAT30-1 is made for years of rigorous firingwith a heavy 2 tubular steel frame . A heat shield and 1 3/4 air gap between the kiln and ventilated switch box help keep electrical components cool for long,trouble-free service . Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation . Turn off power to the controller when the kiln is not in use using an on/off switch on the control panel .
Designed for production
Paragon's warranty is not affected by frequency of use . Fire your new kiln every day if you want,even in commercial settings . That will have no effect on the warranty period .
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry,black,blue,hot pink,jade,navy,purple,or turquoise . Scroll down to see color samples in the options section .

Max. Temperature 593℃
Amps 80
Phase 1
Watts 19200
Nema Direct
Breaker Size 100
Circuit Copper Wire Size 2 gauge
TUV tested to CSA and UL Standard 499 N
CE N
Control Type Sentry Xpress 4.0 Digital 3-key
Voltage 240
Hertz 60
Kiln Type Top Loading Square
Side 4
Chamber Volume 19.90 CU.FT. (563.51 litres)
Dimensions: Chamber (W x D x H) L= 62.50 IN(1588 mm) x W= 26.50 IN (673 mm ) x D= 20.50 IN (531 mm)
Dimensions: External (W x D x H) 84.00W x 49.00D x 37.50H Inches (2134W x 1245D x 953H mm)
Ship Size 86.00W x 53.00D x 44.00H Inches (2184W x 1346D x 1118H mm)
Ship Weight 1448.00 Lbs. (656.81 Kg.)
Ship Method & Notations This Kiln Ships Via Truck
Part Number PAT30-1
The Outer Size of the Kiln and the Shipping Size Left to Right; Depth = Front to Back; Height = Top to Bottom