-- Type to Search Products --

Paragon PMT Kiln 1.8 cu ft #PMT-18

Paragon PMT-18 Heat Treating Furnace

  • On/off micro switch stops power to elements when door is opened
  • Dropped, recessed sidewall element grooves
  • 3 inch insulating refractory firebricks in the roof, walls and bottom
  • Electrical components stay cool in a slotted base.
  • Thermocouple with high-nickel stainless steel sheath for long life
  • Stainless steel sheet metal screws
  • TUV tested to UL and CSA standards.
  • Made in the USA

$3,865.38

SKU: PMT-18 Categories: , , Tag:

Paragon PMT Kiln 1.8 cu ft #PMT-18

Paragon PMT-18 Heat Treating Furnace
  • On/off micro switch stops power to elements when door is opened
  • Dropped, recessed sidewall element grooves
  • 3 inch insulating refractory firebricks in the roof, walls and bottom
  • Electrical components stay cool in a slotted base.
  • Thermocouple with high-nickel stainless steel sheath for long life
  • Stainless steel sheet metal screws
  • TUV tested to UL and CSA standards.
  • Made in the USA

Paragon PMT-18 Heat Treating Furnace

Machine shops save time with a furnace at their disposal in their own shop. You will no longer send a die out for heat treating, wait for its return, and then send it out again for additional heat treating. Do the work yourself and start a new profit center in your shop.

Solid Construction

The door swings open with one-handed operation. The PMT-18 furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because they are exposed rather than embedded. You can thread new elements into place following instructions in the manual. The firing chamber is protected by a steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered. Each furnace comes with a cord and plug for immediate installation and a one year warranty.

Complete Instructions

Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner.

Designed for production

Paragon warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Description

Paragon PMT-18 Heat Treating Furnace

Machine shops save time with a furnace at their disposal in their own shop. You will no longer send a die out for heat treating, wait for its return, and then send it out again for additional heat treating. Do the work yourself and start a new profit center in your shop.

Solid Construction

The door swings open with one-handed operation. The PMT-18 furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because they are exposed rather than embedded. You can thread new elements into place following instructions in the manual. The firing chamber is protected by a steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered. Each furnace comes with a cord and plug for immediate installation and a one year warranty.

Complete Instructions

Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner.

Designed for production

Paragon warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.