-- Type to Search Products --

Paragon Xpress Kiln 0.13 cu ft #XPRESS-Q-11A

Paragon Xpress-Q-11

  • A 1/2” hole is stamped into the steel door case and includes a brushed stainless steel cover. We have left the firebrick behind the hole undrilled so that you can drill it to the exact size that you need for a peephole, vent hole, or extra pyrometer hole. 
  • The Xpress-Q-11A heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace.
  • The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the elements back on during cooling. (Extra heat is necessary for annealing large pieces, however.)
  • Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.
  • The Xpress-Q11A can ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.
  • 12 Month Warranty

$961.99

SKU: XPRESS-Q-11A Categories: , , Tag:

Paragon Xpress Kiln 0.13 cu ft #XPRESS-Q-11A

Technical Specification

Max. Temperature 1287℃
Amps 12
Phase 1
Watts 1440
Nema 5-15R
Breaker Size 15
Circuit Copper Wire Size 14 gauge
TUV tested to CSA and UL Standard 499 Y
CE N
Control Type Sentry Xpress 4.0 Digital 3-key Cer
Voltage 120
Hertz 60
Kiln Type Front Loading Square
Side 4
Chamber Volume 0.13 CU.FT. 3.68 liters
Dimensions: Chamber (W x D x H) 6.00 x6.00 x 6.25 in.(152 x 152 x 159mm)
Dimensions: External (W x D x H) 11.00W x 15.00D x 18.00H Inches (279W x 381D x 457H mm)
Ship Size 22.00W x 17.00D x 19.00H Inches (559W x 432D x 483H mm)
Ship Weight 44.00 Lbs.(19.96 Kg.)
Ship Method & Notations This Kiln Ships Via UPS/FedEx
Part Number 11211J1BTA
The Outer Size of the Kiln and the Shipping Size
Doorway Clearance Needed
Paragon Xpress-Q-11
  • A 1/2” hole is stamped into the steel door case and includes a brushed stainless steel cover. We have left the firebrick behind the hole undrilled so that you can drill it to the exact size that you need for a peephole, vent hole, or extra pyrometer hole. 
  • The Xpress-Q-11A heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace.
  • The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the elements back on during cooling. (Extra heat is necessary for annealing large pieces, however.)
  • Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.
  • The Xpress-Q11A can ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.
  • 12 Month Warranty
Paragon Xpress-Q-11 The Xpress-Q-11A fires rapidly to 2350F. Create breathtaking jewelry or small keepsakes using almost any medium you can imagine: silver clay, enameling, china painting, glass, lost wax casting, ceramics, stoneware, and porcelain. Since the kiln opens from the front instead of the top, it is ideal for copper enameling. The Xpress-Q-11A is a true multipurpose kiln. Imagine the glass you could sag, slump, and fuse with this kiln. Make pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment. It is light-weight; take it with you to seminars or on vacation. The Xpress-Q-11A comes with the Sentry Xpress digital controller, which is mounted in the kiln base (instead of a side switch box) to save table space. The front control panel is tilted for easy operation. The Sentry Xpress 3-key controller is packed with features. It includes Cone-Fire and 8-segment Ramp-Hold modes. (Note: Ramp-Hold and Cone-Fire on the Sentry Xpress do not include some of the advanced features of the 12-key Sentry 2.0.)   Features of the Sentry Xpress 3-key Controller for Ceramic Kilns Fire to a pyrometric cone by merely entering cone number and slow, medium or fast speed. Program Review lets you check the program you are about to fire. Set a temperature alarm to remind yourself to close a vented lid. Design Ramp-Hold programs with up to 8 segments (steps). Skip a segment in Ramp-Hold during firing. Hold (soak) the temperature in both Cone-Fire and Ramp-Hold. Control both heating and cooling in Ramp-Hold. Add hold time in Ramp-Hold during firing. Change the target temperature in Ramp-Hold during firing. Temperature Display throughout firing and cooling in your choice of °F or °C Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln later to suit your schedule. Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element. LED Lights show whether you are in program, review, or firing mode. 12 Month Warranty      

Description

Paragon Xpress-Q-11

The Xpress-Q-11A fires rapidly to 2350F. Create breathtaking jewelry or small keepsakes using almost any medium you can imagine: silver clay, enameling, china painting, glass, lost wax casting, ceramics, stoneware, and porcelain. Since the kiln opens from the front instead of the top, it is ideal for copper enameling. The Xpress-Q-11A is a true multipurpose kiln. Imagine the glass you could sag, slump, and fuse with this kiln. Make pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment. It is light-weight; take it with you to seminars or on vacation. The Xpress-Q-11A comes with the Sentry Xpress digital controller, which is mounted in the kiln base (instead of a side switch box) to save table space. The front control panel is tilted for easy operation. The Sentry Xpress 3-key controller is packed with features. It includes Cone-Fire and 8-segment Ramp-Hold modes. (Note: Ramp-Hold and Cone-Fire on the Sentry Xpress do not include some of the advanced features of the 12-key Sentry 2.0.)

 

Features of the Sentry Xpress 3-key Controller for Ceramic Kilns

Fire to a pyrometric cone by merely entering cone number and slow, medium or fast speed. Program Review lets you check the program you are about to fire. Set a temperature alarm to remind yourself to close a vented lid. Design Ramp-Hold programs with up to 8 segments (steps). Skip a segment in Ramp-Hold during firing. Hold (soak) the temperature in both Cone-Fire and Ramp-Hold. Control both heating and cooling in Ramp-Hold. Add hold time in Ramp-Hold during firing. Change the target temperature in Ramp-Hold during firing. Temperature Display throughout firing and cooling in your choice of °F or °C Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln later to suit your schedule. Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element. LED Lights show whether you are in program, review, or firing mode.

12 Month Warranty

 

 

 

Max. Temperature 1287℃
Amps 12
Phase 1
Watts 1440
Nema 5-15R
Breaker Size 15
Circuit Copper Wire Size 14 gauge
TUV tested to CSA and UL Standard 499 Y
CE N
Control Type Sentry Xpress 4.0 Digital 3-key Cer
Voltage 120
Hertz 60
Kiln Type Front Loading Square
Side 4
Chamber Volume 0.13 CU.FT. 3.68 liters
Dimensions: Chamber (W x D x H) 6.00 x6.00 x 6.25 in.(152 x 152 x 159mm)
Dimensions: External (W x D x H) 11.00W x 15.00D x 18.00H Inches (279W x 381D x 457H mm)
Ship Size 22.00W x 17.00D x 19.00H Inches (559W x 432D x 483H mm)
Ship Weight 44.00 Lbs.(19.96 Kg.)
Ship Method & Notations This Kiln Ships Via UPS/FedEx
Part Number 11211J1BTA